KONNWEI ELM327 V1.5 OBD2 Scanner KW902 Bluetooth-compatible Auto Scanner MINI ELM 327 OBD 2 KW902 Code Reader for Android Phone

KONNWEI ELM327 V1.5 OBD2 Scanner PIC18f25k80 Bluetooth-Compatible KW902 Auto scanner OBD 2 Diagnostic Tool MINI ELM 327 OBDII

ELM327 V1.5 (Wireless BT5.0 )Features:

* Small size, compact structure. Plug and never unplug

* Stable wireless connection via Wireless BT5.0

* No wires or batteries (adapter is powered by the 12V Vehicles battery)

* 30 Minutes without communication, it will automatically go to sleep mode.

* Ultra low cumsumption in sleep-mode, less than 10MA

* Supports ALL OBDII protocols, widest coverages

* The adapter uses the fast communication mode and most reliable PIC18F25K80 chips, up to 30PID/S.

* True ON-OFF button, you can press button to turn off the elm if not in use.

ELM327 V1.5 (Wireless BT5.0) Function List:

1.Read diagnostic trouble codes, both generic and manufacturer specific

2.Clear trouble codes and turn off the MIL (“Check Engine” light)

3.Display current sensor data, including:

4.Engine RPM

5.Calculated Load Value

6.Coolant Temperature

7.Fuel System Status

8.Vehicle Speed

9.Short Term Fuel Trim

10.Long Term Fuel Trim

11.Intake Manifold Pressure

12.Timing Advance

13.Intake Air Temperature

14.Air Flow Rate

15.Absolute Throttle Position

16.Oxygen sensor voltages/associated short term fuel trims

17.Fuel System status

18.Fuel Pressure

how to connect the product with your car？

support Android and IOS!!!

How to setup B-luetooth pairing: BLE5.0 Dual mode version

For Android users:
Home screen
Go to setting page
Select V-LINK Default password is “1234”
Device paired
Run Torque app
Go to Torque app OBD II adapter setting
Choose connecion type>Bluetooth
Choose B-luetooth device>V-LINK
Exit Torque app completely
Run Torque app
Connected

For iOS users:
Home screen
Go to setting page
Click on B-luetooth function
(Device name is invisible)
Run Accurate app
Go to Accurate app setting page
Select B-luetooth and connect
Exit Accurate app and run again
Connected

FAQ Before Orders (Please kindly read before)

Q1: What is the version of the ELM327?

A1: This is the real V1.5 High Quality version, original Microchip PIC18F25K80, frequency 4mhz of crystal oscillator there, support commands ATAL and ATPPS, Support all OBD2 Vehicles.

Q2: What is difference between V1.5 and V2.1 ? and How can I check it ?

A2: Our newest ELM327 is 100% V1.5, which is support full protocols version(10 protocols), especially J1850 & J1939 Protocols for Japanese Cars and American Cars, other elm327 only 7 or 9 protocols.

Q3: Does this adapter support the diesel cars or trucks ? Is this working with IOS?

A3: ELM327 does support the diesel vehicles or trucks, and this ELM327 is Wireless BT3.0 version for android system cellphones only. If you need the IOS version, please refer to KW902 wifi

Q4: How do i know if my car is working with the ELM327 or not ?

A4: This ELM327Wireless BT3.0 adapter is working for all OBD-II Compliant vehicles.

The OBDII compliant vehicles referernce as below:

1996 or newer model year vehicle made in the United States

Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2004 or newer model year vehicle made in the European Union

Fit for Alfa Romeo, Fit for SAAB, Fit for Acura, Fit for Opel, Fit for Audi, Fit for Seat, Fit for Peugeot ,Fit for Renault after 2009 year, doesn’t support Clio 2

Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover

Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar

2008 or newer model year vehicle made in the Asian car makes

Fit for KIA , Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda

Fit for Nissan, Fit for Subaru , Fit for Suzuki, Fit for Toyota

Warm Notice for Special car models:

For Lada/ VAZ/ UAZ car makes, please don’t purchase If your car is before 2006.

For Ssangyong car makes, please don’t purchase If your car is before 2008.

For Renault – Dacia – Logan car model, please don’t purchase If your car is before 2009.

NOTE: Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is spercial design, so it may not compatible with some cars which do not support OBD2 protocol. If you’re not sure, ask us anytime!

Q5: What functions that I can do with the ELM327 ?

A5: The device is a small adapter that plugged into the vehicle OBD-connector. On Wireless, it connects to any computer, tablet or smartphone( android), With associated diagnostic procedures . Doing these simple operations, you will be able:

* Read, erase and display code descriptions problems – both standard and special manufacturers.

* Measure the fuel consumption.

* Display real-time operating performance of the car, such as momentum, vehicle speed, oil pressure, coolant temperature, engine load, intake manifold pressure, throttle position, the values of oxygen sensors, air intake

temperature, and more.

* Turn off the MIL (signal Check Engine).

* Download data to external media in a variety of formats for later printing.

* Record various parameters, display graphics in real time, and more.

Q6: What is the function of the ON/OFF button ?

A6: The blue ON/OFF button is for reset/ wake up the device, because this new designed ELM327 is built with auto-sleep mode, after 30 min without communication, it will go in sleep-mode. The Sleep mode consumption of our scanner is only 10MA, so there is no need to worry about leaving it in car over night with plugging in.

PACKING LIST

1x KW902 Wireless BT5.0 scanner (pic18f25k80 chip set)
1x English User Manual